Blodgett SN-5G Installation Operating & Maintenance Manual page 13

WARNING: In the event a gas odor is detected, shut down equipment at
the main shut off valve and contact the local gas company or gas supplier
for service.
LIGHTING
1. Ensure power, gas and water supply is on.
2. Turn power switch "ON".
3. Generator tank will begin filling with water.
4. Once water level has been reached, the ignition light should come on and remain on
until ready light comes on.
5. Steamer is now ready for use.
SHUTDOWN
STAND BY
1. Set timer to "OFF" position and leave door slightly open.
COMPLETE SHUTDOWN
1. Set timer to "OFF" and turn power switch "OFF". Generator will drain automatically.
2. Turn water supply "OFF".
3. Turn gas supply "OFF".
4. Disconnect power supply.
13