Floor-Standing Cartridges - ELECTOR REFILL plus Series Operating Manual

REFILL plus

4.5.2 Floor-standing cartridges

Close ball valves.
Open the oval closure.
Ensure clean sealing surfaces
when closing.
www.elector-water-treatment.com
Relieve pressure by opening
the sampling valve.
Rinse out resin and rinse in
barrel or sack.
Reassemble everything. Fill
the system with water.
Loosen the screw connection.
Place the funnel on the empty
cartridge and fill in new resin.
Note:
Only use resin suitable for
treatment of top-up water for
heating systems!
After changing the resin, the
cartridge should be flushed
twice with a water volume
corresponding to the cartridge
content. This water should be
drained.
Do not let the resin dry out.
Page 30