Description Display Symbols; Water Level; Resistance; Cold Machine - La Cimbali M100 GT Engineer's Manual

WATER LEVEL

This symbol indicates the boiler water level.
During the loading phase, the bottom part of the
icon blinks.
When the optimum level is reached, the symbol
looks like this:

RESISTANCE

This symbol indicates that the resistance is
activated and functioning; a thicker luminous flow
passing through the resistance shows the electric
heating is on.
When the boiler pressure reaches the set value,
the icon looks like this:
This indicates that the heating resistance has
been disabled.
Note: the customer cannot switch on or switch
off the electric heating.
When the on/off function is programmed, the
electric heating takes place automatically.
SEVICE BOILER PRESSURE
This symbol indicates the boiler pressure value.
If the icon
will be displayed analogically. This will be shown
on the display:
Press again the icon
regular display mode.

Description display symbols

.
.
is pressed, the pressure gauge
to return to the

COLD MACHINE

This symbol indicates that the machine is in its in-
itial warming stage or that the boiler pressure has
decreased to below 0.5 bar.
It shows the boiler's warming status and appears if
one or more boilers are still in their initial warming
stage or if their temperature decreases to below
55°C.
Pressing the "STOP/continue coffee"
will cause dispensing to occur at the current tem-
perature.
All the other icons are disabled until required
operating pressure is reached.
While waiting for the machine to be ready for use,
attach the filter holders to the groups.
The machine has reached programmed operating
temperature when the icon
on the display.
CUP-WARMER
WI-FI
This symbol appears on the display when the
Wi-Fi module is in the machine.
BLUETOOTH
These symbols refer to Bluetooth communication:
- the icon indicates the presence of the Bluetooth
module on the machine;
- the blue icon indicates that the machine is
communicating with a Bluetooth grinder-
dispenser.
USB
This symbol appears on the display when a USB
pen drive is connected.
USB
This symbol appears on the display when a USB
pen drive is connected.
BDS
BDS activation (Barista Driving System).
2 EN
icon
no longer appears
These symbols indicate the
power currently selected by
the cup warmer.