1
PRELIMINARY OPERATIONS
Format a USB Pen Drive using the FAT32 format. If using Windows, use the predefined formatting
settings as shown in the image.
Copy the recovery files (
M100_Recovery
Pen Drive.
2
START-UP WITH RECOVERY FILES
Switch off the machine and insert the USB Pen Drive.
Turn the machine on again: when it restarts, recovery will begin.
The start of the procedure is indicated through an intermittent beep. During
the update, the machine will beep at regular intervals.
3
The following message is displayed on the machine's
touch screen.
5
Enter the standard data, update the machine data and reactivate
the heating element, if necessary.
Recovery
M100SOS.ppf
; only for M100:
4
Remove the USB Pen Drive.
46 EN
) in the main path of the USB
When the update is complete, the services display
automatically restarts and the following message
appears:
UPDATE COMPLETED
REMOVE USB