Logo - La Cimbali M100 GT Engineer's Manual

On all the machine displays, after a period of inactivity
set on the "Screensaver" menu, the
standard Cimbali logos appear
1 Using any graphics program (e.g. Paint),
create a file that meets certain characteristics;
the prerequisites for a bitmap image to be
used as a custom logo are:
custlogo.bmp
logogrp.bmp
logosrv.bmp
• width less than • width less than
or equal to 270 or equal to 272
pixels; pixels;
• length less than • length less than
or equal to 170 or equal to 480
pixels. pixels.
• 2 4 - b i t b m p • 2 4 - b i t
colour. colour.
Copy onto a USB pen drive the "logogrp.
bmp" and/or "logoserv.bmp" files if you
want to display a logo for the group display
and one for the services display.
Copy the file "custlogo.bmp" if the user
wants to display the same logo on all
displays.
NOTE: If in the USB pen drive there are all
files logo, will be displayed the image of the
file "custlogo.bmp".
4
Press OK and wait for the file to load:

Logo

2
Insert the USB pen drive in the
dedicated slot on the machine:
b m p
3
Turn the machine off and back on again; when it comes back on the following
will appear on the services display:
If in the USB pen drive there is the
file logogrp.bmp and / or logosrv.
bmp
5
Once loading is complete, remove the USB pen drive from the machine.
Note: If the screensaver is active, it is possible immediately see the logos,
without waiting for idle time, every time the user turns off the analogically gauge.
41 EN
the icon will appear on the
services display:
If in the USB pen drive there is the
file custlogo.bmp