Table of Contents
Advertisement
Coffee Boiler - this parameter includes
the items for setting the coffee boiler
temperature; values that can be set
are 60°C to 110°C (140°F to 230°F)
with steps of 0.5°C.Group temperature
programming with offset correction
possible (see section in pages below).
Softener Reg. - includes the resin
regeneration parameters: litres of resin
(from 0.1 l to 25 l), hardness (from 0°F to
45°F). The decreasing resin efficiency
level is also indicated.
Change water Filter - On reaching the
litre level set on the display a message is
displayed which prompts replacement
of the filter.
For both functions, an efficiency
percentage is displayed (Softener/
Filter), descending from 100% to 0%.
Maintenance - includes 4 submenus
for setting maintenance parameters:
- Max cycles - the number of cycles
set.
- Max days - the number of days set.
- No. cycles/days - this is the
number of cycles and days until next
maintenance.
- Maintenance - YES/NO.
Enables (YES) or does not enable
countdown of the cycles and days until
the next maintenance activity.
11. Programming
Bds - see section "BDS Activation" in
the following pages.
Flush - see section "Enabling Flush
key" in the following pages.
Low Power - YES/NO
Drying Time - coffee disc drying time
from 0 to 5 with steps of 0.1 seconds.
26 EN
Screensaver - Possibility of program-
ming the screensaver display time (from
30" to 20')
Standard data
- Allows loading of
standard data or reconfiguration of the
machine. In both cases the machine is
automatically restarted.
Password- allows change of the code
for accessing technical programming.
Hide quick links:
Advertisement
Table of Contents
