Brodit 516042 Quick Manual

25 February, 2014, www.brodit.com, © 2014 Brodit AB
Product 516042
516042 Holder with Pass-Through Connector For a more secure upright and horizontal position. Adjustable
holder, fits devices with skins.
This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright
position and a horizontal position - simply turn the holder into desired position. When installing, place the holder
in the desired position (upright/horizontal) that you will be using as standard. The holder is adjustable and fits
devices with skins. The holder provides a more secure upright and horizontal position than a standard holder.
The holder is equipped with a pass-through connector. This means that all cables that can be used with the
iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have
attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each
time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner
look. (Cable not included)
The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light
reflection on the screen. Attach onto ProClip Mounting Platform.
EAN: 7320285160422
Item no 516042 fits:
Apple iPhone 3G (For all countries)
Apple iPhone 3GS (For all countries)
1 (2)