Brodit 541861 Installation Instructions

Download this manual

Product 541861

541861 Holder for Locking Passive holder with Vesa-holes. With spring stud locking. Fits unit both with and

without Kick-Stand with Hand-Strap.

The holder with locking is to be used when you want to have your tablet extra firmly in place. The holder has a

spring stud locking device, it keeps your device in a firm grip in the holder. You can connect e.g. a charging cable

to the device when it is in the holder.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac

without having it easy removable. The holder is made of extra strong plastic. Fits units both with and without

handstrap.

EAN: 7320285418615

Item no 541861 fits:

Getac RX10 (For all countries)

Page 1 15 July, 2021, www.brodit.com, © 2021 Brodit AB Product 541861 541861 Holder for Locking Passive holder with Vesa-holes. With spring stud locking. Fits unit both with and without Kick-Stand with Hand-Strap. The holder with locking is to be used when you want to have your tablet extra firmly in place. The holder has a spring stud locking device, it keeps your device in a firm grip in the holder.
Page 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder. 1. Place the holder onto the desired position. Screw the holder into place with the enclosed screws. 2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder.