ABB A150-M67 Operation Manual page 48

Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
2 Removing and Installing / 2.3 Installing the turbocharger
Tightening pressure screws
Fig. 14: Tightening pressure screws
Product
A150
A155
Table 4: Torque-controlled tightening of the pressure screws
1. Screw in pressure screws crosswise by hand until reaching the stop.
2. Tighten pressure screws crosswise to 50 % of the tightening torque specified in the
table.
3. Tighten pressure screws crosswise to 100 % of the tightening torque specified in the
table.
4. Work in a circle to tighten all pressure screws to 100 % of the tightening torque specified
in the table.
5. Tighten pressure screws to 100 % in 5 ... 7 rounds until the required residual tightening
angle of < 20° is achieved.
© Copyright 2020 ABB. All rights reserved.
Fixing screw [mm]
M30
M36
HZTL4032_EN
Tightening torques [Nm]
45
85
Rev.P March 2020