ABB A150-M67 Operation Manual page 137

Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
9 Dismantling and fitting with removed air inlet and gas outlet / 9.19
Installing the gas outlet casing
9.19 Installing the gas outlet casing
Variant without support
Fig. 72: Fitting gas outlet casing without support
Product
A150
A155
Table 50: Tightening torque (51009)
1. Coat thread of bolts (51008) with high-temperature grease.
2. Insert a new gasket (61002) into the gas outlet casing (61001).
3. Fit swivel lifting eyes (S) to the gas outlet casing (61001). Secure lifting gear to the swivel
lifting eye.
4. Place gas outlet casing at turbine casing (51000). Observe the marking.
5. Fit hexagon nuts (51009). Observe the tightening torque.
6. Fit insulation ring. Observe tightening torques (see
7. If present: Attach waste gate pipe. Tighten in accordance with enginebuilder's specifica-
tions.
© Copyright 2020 ABB. All rights reserved.
Size Tightening torque [Nm]
M16
M16
Table of tightening torques
HZTL4032_EN
200
200
→74).
Rev.P March 2020