Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IKA NANOSTAR 7.5 digital
Summary of Contents for IKA NANOSTAR 7.5 digital
- Page 1 IKA NANOSTAR 7.5 digital...
- Page 2 ENGLISH...
-
Page 3: Table Of Contents
Operator panel and display ���������������������������������������������������������������������������� 12 Installation �����������������������������������������������������������������������������������������������������12 Operation ������������������������������������������������������������������������������������������������������18 USB interface ������������������������������������������������������������������������������������������������� 19 Error codes ���������������������������������������������������������������������������������������������������� 20 Maintenance and cleaning ����������������������������������������������������������������������������� 21 Fig. 1 Accessories ���������������������������������������������������������������������������������������������������� 22 Permitted IKA stirrer tools ������������������������������������������������������������������������������ 22 Warranty ������������������������������������������������������������������������������������������������������� 22 Technical data ������������������������������������������������������������������������������������������������23... -
Page 4: Eu Declaration Of Conformity
Danger! A––– Position number › Users must make sure that the standby key of the IKA device can be accessed immediately, directly and without risk at any time� If installation or positioning cannot ensure this access Correct/Result at all times, an additional EMERGENCY STOP switch that can be easily accessed must be Shows the correct execution or the result of an action step�... -
Page 5: Intended Use
› Pathogenic materials must only be processed in closed vessels under a suitable fume hood� device switches off permanently� If you have any questions, please contact IKA application support� › The operation of a free rotating shaft end is prohibited� Therefore, for safety reason, only ›... -
Page 6: Unpacking
The clamping chuck and output shaft permit clamping IKA recommend stirrer tools (see section “Permitted IKA Stirrer tools“)� The output shaft is designed as a hollow shaft and the opening on the top side of the housing is closed with a plastic cover� When the stirrer cover is opened,... -
Page 7: Operator Panel And Display
Operator panel and display /// Assembling the overhead stirrer to the stand Standby key Device switches on / enters standby (no disconnection from the power supply network) Display Display the speed value� Control knob Set the speed by rotating� (Rotating / Pressing) Start / stop the stirrer function by pressing�... - Page 8 /// Assembling the stirring element using the chuck /// Securing the mixing vessel to the stand 2�1 /// Assembling the stirring shaft protector 2�1...
- Page 9 /// Attaching the interchangeable adapter /// Connecting to the power Click Notice! The AC adapter is suitable for 100 VAC to 240 VAC� The exchangeable adapter for the relevant country must be attached before the AC adapter is plugged into the mains socket�...
-
Page 10: Operation
Operation /// Stopping / Switching off the device Notice! Secure the device to a stable stand with a cross sleeve� The stirring vessel must always be securely fixed for safety reasons� You must also ensure that the mounting device (stand) is set up in such a way that it is not liable to topple and does not start to move during the stirring procedure�... -
Page 11: Error Codes
› Carry out corrective measures� › Restart device� /// Cleaning For cleaning disconnect the mains plug! Use only cleaning agents which have been approved by IKA to clean the device: water containing Cause › Temperature inside of the device is too high�... -
Page 12: Accessories
Warranty Hollow shaft internal diameter 8�5 In accordance with IKA warranty conditions, the warranty period is 24 months� For claims under Extension arm (Ø × L) 13 × 160 the warranty please contact your local dealer� You may also send the machine direct to our factory, Dimensions (W ×... - Page 13 Phone: +81 6 6730 6781 Phone: +91 80 26253 900 Phone: +44 1865 986 162 eMail: info@ika�in eMail: info_japan@ika�ne�jp eMail: sales�england@ika�com Discover and order the fascinating products of IKA online: www.ika.com IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide Technical specifications may be changed without prior notice�...
Need help?
Do you have a question about the NANOSTAR 7.5 digital and is the answer not in the manual?
Questions and answers