Install - Emerson Rosemount FCL Series Quick Start Manual

June 2019
2

Install

2.1 Unpack and inspect
Procedure
1. Inspect the shipping container(s). If there is damage, contact the
shipper immediately for instructions.
2. If there is no apparent damage, unpack the container(s).
3. Ensure that all items shown on the packing list are present.
If items are missing, notify Emerson immediately.
2.1.1 Rosemount
correction)
The Rosemount FCL-01 consists of the following items mounted on a back
plate.
1. Rosemount 1056-03-24-38-AN transmitter with sensor cable
attached.
2. Constant head overflow sampler with flow cell for chlorine sensor.
The free chlorine sensor (Rosemount 499ACL-01-54-VP), three membrane
assemblies, and a bottle of electrolyte solution are in a separate package.
2.1.2 Rosemount
The Rosemount FCL-02 consists of the following items mounted on a back
plate:
1. Rosemount 1056-03-24-32-AN transmitter with sensor cables
attached.
2. Constant head overflow sampler with flow cells for pH and chlorine
sensors.
3. Stand to hold pH buffer solution during calibration.
The free chlorine sensor (Rosemount 499ACL-01-54-VP), shipped with three
membrane assemblies and a bottle of electolyte solution, and the
Rosemount 3900VP-02-10 pH sensor are in separate packages.
2.2 General installation information
1. Although the system is suitable for outdoor use, do not install it in
direct sunlight or in areas of extreme temperature.
Quick Start Guide
™
FCL-01 (free chlorine without continuous pH
™
FCL-02 (free chlorine with continuous pH correction)
Quick Start Guide
7