Switching the Dispenser
unit on
Ice cubes can only be made when the
ice cube container is completely
closed.
In Settings mode , use the
and sensors to select
and touch OK to confirm your
selection.
Use the and sensors to select
and confirm your selection with
On
OK.
Close the appliance door.
The Ice/Water dispenser is now ready
for operation.
All sensors in the Ice/Water dispenser
control panel should now be highlighted
in white.
If this is not the case, the system lock
has been activated (the sensor will
be highlighted in white, see "Operating
the Ice/Water dispenser – Switching the
system lock on/off").
Once the freezer has cooled down to its
set temperature, the ice cube maker will
fill with water.
As soon as the water is frozen, ice
cubes will fall out of the ice cube maker
into the ice cube container.
Ice cube production is halted
automatically when the ice cube
container is full.
After the Ice/Water dispenser has
been switched on, it can take up to
24 hours until the first serving of ice
cubes is ready.
Operating the Ice/Water dispenser
Dispenser unit
After the appliance door has been
opened and closed, it can take several
seconds until the Ice/Water dispenser
is ready for operation and the sensors
can be operated again.
99