Deactivating Miele@home
In Settings mode , use the
and sensors to select
and touch OK to confirm your
selection.
Use the and sensors to select
and confirm your selection
Deactivate
with OK.
Deactivation successful
display.
Confirm the message with OK.
Your refrigeration appliance is now
disconnected from your Wi-Fi network.
The symbol will go out in the display.
Activating Miele@home
If you have previously activated
Miele@home and then deactivated the
connection, you can reactivate the
connection.
In Settings mode , use the
and sensors to select
and touch OK to confirm your
selection.
Use the and sensors to select
Activate
and confirm your selection
with OK.
Activation successful
display.
Confirm the message with OK.
If the Wi-Fi connection is active, will
appear in the display.
Miele@home
will appear in the
Miele@home
will appear in the
Selecting further settings
Checking the Wi-Fi connection status
In Settings mode , use the
and sensors to select
and touch OK to confirm your
selection.
Use the and sensors to select
Connection status
selection with OK.
Information about the Wi-Fi connection
status will appear in the display:
– connected: strong connection
– connected: average connection
– connected: weak connection
– : no connection
Setting up Miele@home again
If you have changed your Wi-Fi
network, you can set up Miele@home
again for your appliance.
In Settings mode , use the
and sensors to select
and touch OK to confirm your
selection.
Use the and sensors to select
Set up again
and confirm your
selection with OK.
Reset configuration?
display.
Use the and sensors to select
Yes
or
No
and confirm your selection
with OK.
Miele@home
and confirm your
Miele@home
will appear in the
79