Miele F 2671 Vi Operating And Installation Instructions page 30

Installation
The anti-tip brackets prevent the
refrigeration appliance from tipping.
The anti-tip brackets are also used to fix
the housing unit securely to the
surrounding walls.
 Use 2 anti-tip brackets  for each
individual appliance or 4 anti-tip
brackets for each (side-by-side)
combination of 2 appliances.
 Position the anti-tip brackets  on
the left and right side of the
installation niche.
Depending on the subsequent
adjustment of the feet, the anti-tip
brackets are positioned 2134–
2164 mm from the floor of the niche.
30

Risk of injury and damage due to
the refrigeration appliance tipping
over.
If the anti-tip brackets are fixed too
high, they cannot be used to secure
the refrigeration appliance.
The height between the
anti-tip brackets and the top of the
refrigeration appliance must not
exceed 8 mm.
 Make sure that the gap between the
refrigeration appliance's rear wall and
the installation niche does not exceed
51 mm.
 Place a wooden wedge behind the
anti-tip brackets  if necessary.
 While holding the anti-tip brackets in
place, mark the drill holes on the rear
wall of the installation niche.