Message
F Please call Miele Service
appears in the display
and an alarm sounds.
The symbol lights up
in the display. The
refrigeration appliance
does not get cold, but
the appliance controls
are working.
Possible cause and remedy
There is a fault.
Make a note of the fault message if necessary.
Call Miele.
To turn the alarm off, touch the symbol.
The error message will not disappear from the
display until the error has been rectified.
The voltage level is too high or too low.
Observe the connection data in "Installation -
Electrical connection".
Contact customer service if necessary.
To turn the alarm off, touch the symbol.
The error message will not disappear from the
display until the error has been rectified.
is switched on. Demo mode allows the
Demo mode
appliance to be presented in a showroom without the
cooling system being switched on. Do not activate
this setting for domestic use.
Switch off Demo mode (see "Selecting further
settings - Switching off
Problem solving guide
").
Demo mode
115