User Interface Setup - Kenwood DDX9907XR Instruction Manual

Setup

User Interface Setup

You can setup user interface parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each parameter as follows.
[Small Audio Text]
■
Change the text size for the source control
screen.
[ON] : Change the text size smaller.
[OFF] (Default): Cancel.
■ [Beep]
Turn the key touch tone on or off.
Default is "ON".
[Widget SETUP]
■
Set up the widget displayed on the Home
screen. (P.21)
[Parking Assist Display]
■
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDataLink
(commercially available) is connected.
82
[Parking Assist Position]
■
Select where to display information about
obstacles on the screen (left or right).
"Left"/"Right" (Default)
This can be set when the iDataLink
(commercially available) is connected.
[Language Select]
■
Select a language.
[Touch Panel Adjust]
■
(DDX9707S / DMX9707S)
Adjust the sensing position of the touch
panel. (P.82)
[Time Format]
■
Select the time display format.
"12-Hour" (Default)/"24-Hour"
■ [Clock]
[GPS-SYNC ](Default): Synchronizes the clock
time with the GPS.
[Manual]: Set the clock manually.
[Time Zone]
■
Select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.83)
Ñ
Touch panel adjustment
1
Touch [Touch Panel Adjust] on the User
Interface screen.
h Touch Panel Adjust screen appears.
h
2
Follow the instruction on the screen and
long touch the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset it to the default, touch [Reset].
].
2