User Interface Setup
You can setup user interface parameters.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each parameter as follows.
[Small Audio Text]
■
Change the text size for the source control
screen.
[ON] (Default): Change the text size smaller.
[OFF]: Cancel.
[Steering Remote Controller]
■
Sets the desired function in the steering
remote controller.
See Learning function of steering remote.
(P.72)
■
[Beep]
Turn the key touch tone on or off.
Default is "ON".
[Widget SETUP]
■
Set up the widget displayed on the Home
screen. (P.24)
[Gesture Control] *
■
Select to be on or off the Gesture Control.
(P.73)
Default is "ON".
[Gesture Beep] *
■
The beep comes out when a gesture is
detected.
Default is "ON".
[Gesture SETUP] *
■
Assign the functions or sources/screens to
display for gesture control. (P.73)
1
1
1
[Gesture Sensitivity] *
■
If you have selected [OFF] for [Gesture
Control], adjust the detection range of the
Gesture Control from "1"(short) to "12"(long).
Default is "7".
[Language Select]
■
Select a language.
[Touch Panel Adjust]
■
(DDX8020S / DMX8020S)
Adjust the sensing position of the touch
panel. (P.72)
[Time Format]
■
Select the time display format.
"12-Hour" (Default)/"24-Hour"
■
[Clock]
DDX9020DABS / DDX920WDABS /
DMX8520DABS
[GPS-SYNC ](Default) : Synchronizes the clock
time with the GPS.
[Manual] : Set the clock manually.
DDX8020S / DDX820WS / DMX8020S /
DMX820WS
[RDS-SYNC ](Default) : Synchronizes the clock
time with the RDS.
[Manual ]: Set the clock manually.
[Time Zone]
■
Select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.72)
*1 DDX920WDABS only
Setup
1
71
English