Kenwood DDX9907XR Instruction Manual page 154

Dashboard camera interface
7
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.33)
8
Accessory 9: GPS Antenna
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
9
Accessory 4: Bluetooth Microphone
3rd view camera input (Yellow). See To set up
10
the camera assignment settings (P.34).
Rear view camera input (Yellow)*
11
Front view camera/Dashboard camera input
12
(Yellow).*
3
See To set up the camera assignment
settings (P.34).
13 VIDEO Output (Yellow)
*1 Connecting Mini plug to RCA cable to AV-IN
terminal enables you to use cameras only. If
you connect CA-C3AV (optional accessory),
AV-IN (for visual) or the camera is available.
*2 Connect an HD camera to Rear view camera
input terminal to use HD video. (DDX9907XR /
DMX957XR only)
*3 Connect an HD camera to Front view camera/
Dashboard camera input terminal to use HD
video. (DDX9907XR / DMX957XR only)
Ñ
Secure the USB extension cable with insulating
tape or the like so that its connectors are not
disconnected.
Ñ
2
[1]
[2]
[3]
Connection/Installation
Securing the USB extension
cable
Connecting a USB device
Accessory 3 (Gray) (1 m)
Accessory 2 (Black) (1 m)
USB device
[2]
USB (Gray) terminal
USB (Black) terminal
USB maximum power supply current :
DC 5 V = 1.5 A
Sold separately
See Securing the USB extension cable
(P.31).
[3]
[3]
[1]
[1]
31
English