Kenwood DDX9907XR Instruction Manual page 77

[Rear Camera Settings *]
■
Adjusts the CMOS-3xx series with ID 1 ("Rear
Camera") set. For details, see the instruction
manual of your camera.
[Parking Guidelines]
■
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
[Guidelines SETUP]
■
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.78).
[Front Camera Settings *]
■
Adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
[Front Camera Interruption *]
■
[10 sec]/[15 sec] (Default)/[20 sec]: The front
camera screen is displayed when return the
gear from the reverse (R) position.
[OFF]: Cancel.
*1 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON].
*2 When CMOS-3xx series is connected with
this unit.
*3 To use the function, it is necessary to connect
CMOS-3xx series and to set [Camera
Assignment Settings] to [Front]. (P.77)
*4 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON] and to set
[Camera Assignment Settings] to [Front].
(P.77)
Ñ
To set up the camera
assignment settings
1
Touch [Camera Assignment Settings] on
the Camera screen. (P.76)
2
Select the item to set up.
[REAR VIEW CAMERA] (DDX9907XR /
■
DMX957XR)
Change the HD camera picture quality
setting when an HD camera is connected.
[FRONT VIEW CAMERA / DASH CAM]
■
Set the camera assignment from view
camera connected to Front view camera/
Dashboard camera input terminal.
2
3
3
4
Other External Components
Change the HD camera picture quality
setting when an HD camera is connected.
(DDX9907XR / DMX957XR only)
[3rd VIEW CAMERA]
■
Set the camera assignment from view
camera connected to 3rd view camera input
terminal.
■ [AV-IN]
Set the camera assignment from view
camera connected to AV-IN input terminal.
Select the view camera to set up.
2
1
1
Picture quality settings
(DDX9907XR / DMX957XR) *
Switch the picture quality setting when an
HD camera for the rear/front view camera.
"ON"/"OFF" (Default)
2
[Picture from view camera]
Displays the picture from the view camera
connected to the input terminal to be set.
(P.108)
3
[Front] *
2
Assign front position to the view camera
connected to the selected input terminal.
4
[Dashboard Camera] *
Assign dashboard camera position to the
view camera connected to the selected
input terminal.
5
[Right] *
2
Assign right position to the view camera
connected to the selected input terminal.
6
[Left] *
2
Assign left position to the view camera
connected to the selected input terminal.
5
3 4 6 7
1
2
English
77