Usb/Ipod; Connecting A Usb Device; Connect Ipod/Iphone - Kenwood DDX9907XR Instruction Manual

USB/iPod

Connecting a USB device

1
Connect the USB device with the USB
cable. (P.31)
2
Press the [HOME] button.
3
Touch [
].
4
Touch [USB]. (P.13)
Ñ
Disconnect the USB device
1
Press the [HOME] button.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word "USB device" appearing in this manual
indicates a flash memory device.

Connect iPod/iPhone

Preparation
• With an Apple CarPlay-capable iPhone, turn
off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.
• Only one iPod/iPhone can be connected.
Wired connection
Preparation
• Connect an iPod/iPhone with the KCA-iP103
(optional accessory) while Apple CarPlay is not
connected.
1
Connect the iPod/iPhone using the KCA-
iP103. (P.32)
● To disconnect the iPod/iPhone connected
with the cable:
1
Detach the iPod/iPhone.
Bluetooth connection
Pair the iPhone through Bluetooth.
Preparation
• To connect an iPhone via Bluetooth, register it
as a Bluetooth device and do the profile setting
for the connection beforehand. See Register the
Bluetooth device (P.21).
• Connect an iPhone via Bluetooth while Apple
CarPlay and an iPod/iPhone are not connected
via USB.
Ñ
Connectable iPod/iPhone
The following models can be connected to
this unit.
Made for
• iPhone XS • iPhone 8
Max
• iPhone 7 Plus
• iPhone XS
• iPhone 7
• iPhone XR
• iPhone SE
• iPhone X
• iPhone 6s
• iPhone 8 Plus Plus
USB/iPod
• iPhone 6s
• iPod
touch (6th
generation)
17
English