Installation - Apex Digital Pro-care Auto User Manual

Pro-care Auto / English

3. Installation

NOTE: Unpack the box to inspect for any damage which may have occurred during shipment. If there is
any damage, please contact your dealer immediately.
1. Place the mattress on top of the bed frame. There are securing straps on the base of the mattress.
Secure the mattress firmly by fixing the straps to the bed frame; ensure that moving sections of the
bed frame are still free to move.
WARNING: The 5" (12.7cm) overlay mattress must be applied on the underlying mattress.
2. Hang the pump onto bed rail (foot-end), and adjust hangers to best upright position of the pump, or
place the pump on a flat surface.
3. Connect air hose connectors from air mattress to the pump unit. A "click" sound will be heard when
connection is completed and secured.
NOTE: Check and ensure the air hoses are not kinked or tucked under mattress.
4. Plug the power cord into electrical outlet.
CAUTION: Make sure the pump unit is suitable for the local power voltage and frequency.
CAUTION: Position the device in a place where it is easy to disconnect.
5. Then turn the main power switch to ON position.
CAUTION: The pump should only be used with the mattress recommended by the manufacturer. Do not
use it for any other purpose.
6. The cable management loops are provided along the left side of the mattress to cover the power cable.
Please make sure the cable has no signs of damage. After installation, the extra length of the power
cord, if any, should be neatly managed to avoid causing a trip and should be clear of moving bed
mechanisms or other possible entrapment area.
The EQUIPMENT should be firmly placed at position where users/doctors can access to easily.
1
4
2
5
8
3
6