Lafayette Panel Drape with Decorative Wood Pole Installation Instructions

Thank you for choosing Lafayette's Panel Drape. With proper installation and
care, your new panel drape will provide many years of beauty and performance.

Tools Needed

Power Drill, 1/4" Driver and drill bits
Tape Measure
Flat blade Screwdriver
Phillips Screwdriver
Pencil
Level
E.
C.
1 / "
3
16
F.
1/2 ordered width + 1/2"
Installation Instructions
Panel Drape with Decorative Wood Pole
A.
Ordered Width
B.
C.
D.
1/2 ordered width + 1/2"
Mounting Surface
Wood
Drywall, Plaster
Metal

BEFORE INSTALLING

- Remove shade from the package. Keep all packaging
until the shade operates to your satisfaction. Contents
of your hardware package may vary depending on
options chosen. Additional fasteners may be needed
based on your specific mounting surface.

INSTALL THE BRACKETS

When properly installed, the distance between the
E.
inside edges of the brackets should be the same as
1 / "
3
16
F.
the ordered width. (A.)
- To position the top hole location of the wood pole
mounting bracket:
1. Put a pencil mark at the desired height
near the center of opening. (B.)
Note * Lafayette does not take a deduction
for floor clearance.
2. Put pencil marks near left and right bracket
locations, level with center mark. (C.)
3. Measure to center of window/door opening
and mark with pencil. (D.)
4. Measure left and right from center 1/2 ordered
width + 1/2" and mark. (E.)
5. Measure down from bracket height marks (C.)
1 /
3
16
the right and left brackets. (F.)
6. Secure metal brackets to the wall and slide
wood brackets onto metal brackets.
Fastener
#6 Hex Head
Provided
Wall Anchors
Not Provided
Sheet Metal
Not Provided
" to get placement for the top hole of