Figure 1. Display Features
Number
Feature
Trig±
info@Fluke-Direct.ca
Table 4. Display Features
Indication
Polarity indicator for the analog
bargraph.
Positive or negative slope indicator
for Hz/duty cycle triggering.
The continuity beeper is on.
Relative (REL) mode is active.
Smoothing is active.
Fluke-Direct
Number
Feature
gaq101.emf
MAX MIN
Digital Multimeter
Indication
Negative readings, In relative mode,
-
this sign indicates that the present
input is less than the stored
reference.
High voltage present at the input.
Appears if the input voltage is 30 V
or greater (ac or dc), Also appears in
low-pass filter mode. Also appears in
cal, Hz, and duty cycle modes.
AutoHOLD is active.
Display HOLD is active.
Peak Min Max modes and the
response time is 250 μs.
Minimum-maximum recording mode.
AVG
See Low-pass Filter.
.ca
1.800.561.8187
Features
7