Button
(while in MIN MAX mode)
PEAK MIN MAX
(hold for 1 second)
info@Fluke-Direct.ca
Table 7. MIN MAX Functions
Enter MIN MAX recording mode. The Meter is locked in the range displayed before you
entered MIN MAX mode. (Select the desired measurement function and range before
entering MIN MAX.) The Meter beeps each time a new minimum or maximum value is
recorded.
Step through maximum (MAX), minimum (MIN), average (AVG) and present values.
Select 100 ms or 250 μs response time. (The 250 μs response time is indicated by
on the display.) Stored values are erased. The present and AVG (average) values are not
available when 250 μs is selected.
Stop recording without erasing stored values. Press again to resume recording.
Exit MIN MAX mode. Stored values are erased. The Meter stays in the selected range.
Fluke-Direct
Smooth Feature (Power Up Option Only)
MIN MAX Function
.ca
Digital Multimeter
31
1.800.561.8187