Palmrest; Removing The Palm-Rest Assembly - Dell Inspiron 7300 2n1 Black Service Manual

Palmrest

Removing the palm-rest assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the fan.
6. Remove the power-adapter
7. Remove the coin-cell battery.
8. Remove the I/O board.
9. Remove the touchpad.
10. Remove the speakers.
11. Remove the heat sink.
12. Remove the pen-garage
13. Remove the power-button with fingerprint
14. Remove the system board.
NOTE: The system board can be removed along with the heat sink.
15. Remove the keyboard.
About this task
The following image(s) indicate the location of the palm-rest assembly and provides a visual representation of the removal procedure.
Steps
After performing the pre-requisites, you are left with the palm-rest assembly.
Before working inside your
port.
cable.
reader.
computer.
Removing and installing components 49