Steps
1. Place the keyboard on the palm-rest assembly.
2. Align the screw holes on the keyboard with the screw holes on the palm-rest assembly.
3. Replace the 28 screws (M1.2x1.5) that secure the keyboard to the palm-rest assembly.
4. Lift the mylar that covers the screw hole as shown in the bubble located on the image.
5. Replace the screw (M1.2x1.5) that secures the keyboard to the palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the
power-button with fingerprint
3. Install the
I/O
board.
4. Install the
coin-cell
battery.
5. Install the
power-adapter
6. Install the fan.
7. Install the
display
assembly.
8. Install the battery.
9. Install the
base
cover.
10. Follow the procedure in
48
Removing and installing components
reader.
port.
After working inside your
computer.