Configuring Via Phone User Interface; Basic Call Features; Placing A Call - Yealink SIP-T42S Quick Start Manual

Register status icons on the LCD screen:
Registered
Note:
• Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.

CONFIGURING VIA PHONE USER INTERFACE

Network Settings:
Press the Menu soft key when the phone is idle, select
admin)->Network->WAN Port/VLAN/Web Server/802.1x/VPN/LLDP/CDP/NAT
Account Settings:
Press the Menu soft key when the phone is idle, select
admin)->Accounts to configure the account.
Note:
• For more information on account parameters, refer to Configuring via web user interface above.

BASIC CALL FEATURES

PLACING A CALL

Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the
Using the speakerphone:
1. With the handset on-hook, press .
2. Enter the number, and then press the
Using the headset:
1. With the headset connected, press
2. Enter the number, and then press the
Note:
During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
•
pressing the Headset key, the Speakerphone key or by picking up the handset. Headset mode requires
a connected headset.
Ultra-elegant Gigabit IP Phone – SIP-T42S
Registering
Settings->Advanced Settings
Settings->Advanced Settings
Send soft key.
Send soft key.
to activate the headset mode.
Send soft key.
Register Failed
(default password:
to configure the network.
(default password:
Quick Start Guide
7