Chassis Power Supply Module Support
Chassis Power Supply Module Support
This table provides general guidelines only and applies to most chassis hardware configurations. These
guidelines offer a quick way to determine the minimum number of power supplies required for the current
chassis configuration. For a definitive approach to determining the minimum amount of power required,
you must follow the steps outlined in
One Power Supply
Two Power Supplies
Three Power Supplies
Four Power Supplies
page 2-16
"Monitoring Chassis Power" on page
OS7700
Supports one or two CMMs and
up to seven NI modules.
Supports one or two CMMs and
up to eight NI modules.
Provides power supply redun-
dancy.
N/A
OmniSwitch 7700/7800 Hardware Users Guide
Chassis and Power Supplies
2-17.
OS7800
Supports one or two CMMs and
up to six NI modules.
Supports one or two CMMs and
up to 16 NI modules.
Provides power supply redun-
dancy (if only one power supply
is removed or goes down unex-
pectedly). Refer to
page 2-23
more information on power sup-
ply redundancy.
Provides complete power supply
redundancy (if up to two power
supplies are removed or go down
unexpectedly). Refer to
page 2-23
for more information on power
supply redundancy.
April 2005
for