Western Digital Ultrastar Data102 Installation Manual page 66

Installation Guide
CMA Lite:
a. Press the blue latch button labeled "push" to unlatch the elbow side of the CMA arm, and
then swing the arm open.
b. Open all of the baskets.
Figure 39: Open Baskets
c. Gather the SAS, power, and Ethernet cables for installation.
d. Connect the Ethernet cables to the Ethernet ports on the left hand side of the Ultrastar
Data102 , and then route the cables through each of the baskets on the arm.
Note: Route all cables to IOM A (left hand side looking at the rear).
5.2 Ultrastar Data102 Installation Procedure
5. Installation
59