System Operation Settings; System Modes; Fan Operation Settings; Alerts Or Reminders - Honeywell Home T6 Pro Series Installation Instructions Manual

System operation settings

1 Press the Mode button to cycle to the next
available System mode.
2 Cycle through the modes until the required
System mode is displayed and leave it to
activate.
NOTE: Available System modes vary by model
and system settings.

System modes:

‒ Auto
‒ Heat
‒ Cool
‒ Em Heat
‒ Off

Fan operation settings

1 Press the Fan button to cycle to the next
available Fan mode.
2 Cycle through the modes until the required
Fan mode is displayed and leave it to
activate.
NOTE: Available Fan modes vary with system
settings.
Fan modes:
‒ Auto: Fan runs only when the heating or
cooling system is on.
‒ On: Fan is always on.
‒ Circ: Fan runs randomly about 33% of
the time.

Alerts or Reminders*

1 Press Menu, and then press
shows ALRT.
2 Press Select to display which alert(s) are
present.
3 The word SNZE (SNOOZE) appears.
4 Press Select again to snooze the reminder
for 7 days.
5 To clear the alert, press Select, and then
press to go to CLER (Clear).
6 Press Select to clear the reminder.
* Some alerts cannot be snoozed or cleared.
Please call your local heating and cooling
professional if this occurs. The heating and
cooling system may require service.
until display
7