Honeywell Home T6 Quick Start Manual

The T6/T6R smart thermostats are designed to provide
automatic time and temperature control of heating
systems in homes and apartments.
It's compatible with 24-230V on/off and OpenTherm®
appliances such as gas boilers, combi-boilers and heat
pump. Also works with zone valve applications but not with
electric heating (240V).
The T6 is for wired on the wall installations and the T6R for
table stand installations (wireless). All consist of a
thermostat and a Receiver box.
The solution is designed with the installer in mind and
includes a Receiver module with mounting options for
directly on the wall or on a wall box. Wiring can be from
below or from the back by lifting the terminal platform,
which makes installation quick and easy.
The thermostat has a high contrast PMVA display with
dynamic text line and touch screen buttons. The
thermostat has a simple programming philosophy to make
it easier to install and very user friendly.
The T6 is ideal for consumers who want to control their
comfort remotely and is based on a modern design, which
is simple to program and easy to
FEATURES & BENEFITS

Attractive, ultra-modern styling makes it ideal for any
location in any type of home.

Table stand or wall-box mounting thermostat options
to fit a new and replacement installations.

Wi-Fi communication to connect to the Internet

- Smart Home and Apple HomeKit ready

Honeywell Home mobile App for:
Remote view and change of settings
−
Schedule changes
−
Smartphone Geolocation temperature control
−

A dynamic text display on the LCD that gives
enhanced feedback to the user / installer.

High LCD Contrast and backlighting for easier
viewing in all light conditions.

Time out screen with selectable brightness

Factory programmed daily or 5+2 default heating
schedule.

Schedule with up to 6 independent time and
temperature pairs to suit the comfort needs.

"Hold until" temperature override of programmed
schedule temperature till the next switch point.

Schedule off mode for manual operation.

Setpoint and room temperature always displayed.

OFF position has an integral frost protection setting
at minimum 5 C so that pipes in the house will never
freeze in winter.

Alert messages to assist in fault-finding.
use.

Receiver box with clear LED indication and override
button

A flip up wiring platform for easy wiring

On/Off or OpenTherm® compatible heating control.

User menu allows extra functions to be set at the
discretion of the user:
Language selection.
−
Wi-FI setup.
−
Optimisation.
−
Clock setting.
−
Resetting the heating program to factory
−
default.
Brightness.
−
Temperature offset.
−
Lock function.
−

Advanced menu (Installer Set-Up) allows extra
functions to be set at the discretion of the installer
to match the consumers applications and needs:
Language selection.
−
5+2 or daily schedule option.
−
Upper / Lower Set point Limit Adjust.
−
Minimum ON time.
−
Cycle rate.
−
Factory Reset.
−
Binding (wireless version).
−