ABB NETA-21 Installation And Startup Manual page 18

18 NETA-21 remote monitoring tool
Backup/restore function of the remote monitoring tool
The backup and restore function enables the replication of the tool settings to another
similar type of remote monitoring tool. There are two main backup types: full system
backup and backup of the selected settings only.

Backing up the remote monitoring tool
Go to Settings –> Backup and restore and select the backup type.
Note: You must have an SD/SDHC card installed into the SD slot to create a backup.
The SD card must have a minimum of 200 MB free space to enable the
backup/restore functions. Backup and restore files are stored in the BACKUP folder
on the SD card.
Create backup creates a backup according to the selected backup type.
Full system backup enables a full system backup of the remote monitoring tool. The
remote monitoring tool is rebooted before the backup file can be downloaded. After
the tool goes back online, you must log on to the remote monitoring tool. After you
have logged on to the remote monitoring tool, the Backup tab is shown and the
NETA-21 starts sending the backup file to the PC.
Settings backup enables a backup of selected data categories.