Yamaha TMAX ABS Series Owner's Manual page 83

Periodic maintenance and adjustment
1
1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
9. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 N·m (4.3 kgf·m, 32 lb·ft)
10. Check the O-ring for damage and
replace it if necessary.
1. Engine oil filler cap
2. O-ring
11. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.
Engine oil:
Oil quantity:
TIP
Be sure to wipe off spilled oil on any
parts after the engine and exhaust sys-
tem have cooled down.
NOTICE

1

2
12. Start the engine, and then let it idle
13. Turn the engine off, and then
14. Reset the oil change indicator.
8-12
Recommended brand:
YAMALUBE
SAE viscosity grades:
10W-40
Recommended engine oil grade:
API service SG type or higher,
JASO standard MA
Oil change:
2.60 L (2.75 US qt, 2.29 Imp.qt)
With oil filter removal:
2.90 L (3.07 US qt, 2.55 Imp.qt)
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of "CD" or oils of a high-
er quality than specified. In
addition, do not use oils labeled
"ENERGY CONSERVING II" or
higher.
Make sure that no foreign mate-
rial enters the crankcase.
for several minutes while checking
it for oil leakage. If oil is leaking, im-
mediately turn the engine off and
check for the cause.
check the oil level and correct it if
necessary.
(See page 5-10.)
1
2
3
4
5
ECA11621
6
7
8
9
10
11
12
13
14