Table of Contents
Advertisement
Periodic maintenance and adjustment
NO.
ITEM
1
2
13 * Drive belt
3
Drive pulley and
14 *
drive axle
4
15 * Steering bearings
5
6
16 * Chassis fasteners
Front and rear
17
brake lever pivot
7
shaft
Sidestand,
18
8
centerstand
19 * Sidestand switch
9
20 * Front fork
10
Shock absorber
21 *
assembly
11
Rear suspension
relay arm and
22 *
connecting arm
pivoting points
12
23
Engine oil
13
Engine oil filter
24
cartridge
14
CHECK OR
MAINTENANCE JOB
X 1000 km
X 1000 mi
• Check belt condition.
• Replace if damaged.
• Check belt tension.
• Adjust if necessary.
• Lubricate.
• Check bearing assemblies for
looseness.
• Moderately repack with lithium-
soap-based grease.
• Make sure that all nuts, bolts
and screws are properly
tightened.
• Lubricate with silicone grease.
• Check operation.
• Lubricate with lithium-soap-
based grease.
• Check operation and replace if
necessary.
• Check operation and for oil
leakage.
• Replace if necessary.
• Check operation and for oil
leakage.
• Replace if necessary.
• Check operation.
• Change (warm engine before
draining).
• Check oil level and vehicle for
oil leakage.
• Replace.
8-5
ODOMETER
READINGS
1
10
20
30
0.6
6
12
18
At the initial interval and every
10000 km (6000 mi) until 40000
km (24000 mi), and every 5000
km (3000 mi) thereafter.
At the initial interval and
when the oil change
indicator flashes or comes
on.
40
24
Advertisement
Table of Contents
Troubleshooting
