Yamaha TMAX ABS Series Owner's Manual page 43

railroad crossings.
Average fuel consumption:
The average fuel consumption mode
"F.AVE" can be set to "km/L" or
"L/100km". For UK-spec vehicles:
"MPG". (See page 5-13.)
To reset the average fuel consumption,
use the select switch to select the infor-
mation display page that contains the
average fuel consumption display.
Push the " " side of the select switch
so that the average fuel consumption
display flashes, and then push the "
side of the select switch again for 1 sec-
ond while the display is flashing.
TIP
After resetting the average fuel con-
sumption display, "– –.–" will be shown
until the vehicle has traveled 1 km (0.6
mi).
NOTICE
If there is a malfunction, "– –.–" will
be continuously displayed. Have a
Yamaha dealer check the vehicle.
Instantaneous fuel consumption:
The instantaneous fuel consumption
mode "CRNT.F" can be set to "km/L" or
"L/100km". For UK-spec vehicles:
"MPG". (See page 5-13.)
Instrument and control functions
TIP
If there is a malfunction, "– –.–" will
be continuously displayed. Have a
Yamaha dealer check the vehicle.
Setting mode
"
1. Setting mode display
Stop the vehicle and then push the
"MENU" switch for 2 seconds to enter
ECA15474
the setting mode. To exit the setting
mode and return to the standard dis-
play mode, push the "MENU" switch
again
"
TIP
Starting off or turning the vehicle power
off saves all settings changes and exits
the setting mode.
5-10

Instantaneous fuel consumption
cannot be reset.

If traveling at speeds under 10
km/h (6 mi/h), "– –.–" will be dis-
played.
NOTICE
for 2 seconds
".
1
2
ECA15474
3
4
5
1
6
7
8
9
10
or select
11
12
13
14