Two Shoulder Frame Assembly; Assembly Diagram; Left Side Shoulder - Producer's PRIDE 1339494 Assembly Instruction Manual

ASSEMBLY
Notes:
1. Place all parts in a clear area and arrange them on the ground in front of you.
2. Remove all packaging materials and place them back in the box. Do not dispose of the packaging
materials until assembly is complete.
3. Check for completeness and for any any transport damage.
4. At least 2-3 people is needed during this assembly.
5. Keep the manual for future use.
STEP 1: Two shoulder frame assembly.

Assembly diagram:

This side up
Connect the parts #1, #2, #3, #4 together as shown above, to get two Shoulder Frame. One for
left side, one for right side.
Note: The male end of 3-way and 4-way connectors should face upright.

Left Side Shoulder

2
4
1
1
4
3
1
3
4
3
2
Right Side Shoulder
2