Table of Contents
Advertisement
Symptom
Power doesn't turn on.
Leads and connector are incorrectly connected.
The unit doesn't
The fuse is blown.
operate.
Noise and other factors are causing the built-in
microprocessor to operate incorrectly.
Playback is not
The disc is dirty.
possible.
The loaded disc is a type this unit cannot play.
No sound are heard.
Cables are not connected correctly.
The volume level will
not rise.
The volume level is low.
There's no sound.
This unit is not firmly secured.
There's audio skipping.
Cause
Confirm once more that all connections are correct.
Rectify the reason for the fuse blowing, then replace
the fuse. Be very sure to install the correct fuse with
the same rate.
Turn the unit off and then on.
Clean disc.
Check what type the disc is.
Connect the cables correctly.
Adjust the volume.
Secure this unit firmly.
Troubleshooting
Correction
19
Advertisement
Table of Contents
