Leckey Mygo+ User Manual page 53

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
LECKEY HI LOW BASE OPTIONS
Foot Pedal (top of seat to floor)
Min 340cm/13inches
Powered (top of seat to floor)
Min 370cm/15inches
Tilt in Space
Prone
Recline
Base Weight
12kg
6.3 LINAK Actuator specification
- 281209-01
Rated IP51
Duty Cycle Max 10% or 2 min continuous
use followed by 18 min not in use.
Ambient temp +5deg to +40deg C
Ambient Operating temp 22deg
Storage temp -40deg C to 70degC
Push Max 3500N
Pull Max 2000N
Self Lock at 3500N Push – 2000N Pull
Typical speed with full load 4.7mm/sec
Max amps at load of 3500N is 3.9 amps
Noise level dB(A) 48
Power input voltage 24v +- 10%
6.4 LINAK Battery Box - BA18021-00
Rated IP51
Ambient temp +5deg to 40deg C
Storage temp -20deg C to 60deg C
Rated Capacity 1.2 Ah 24v
Charging current is max 0.3A
Lead acid gel filled battery
Max 655cm/26 inches
Max 675cm/27 inches
10°
25°
26.5lbs
6.5 LINAK Handset - HB41000-00004
Rated IP51
Control current 100mA per channel (Max)
Ambient temp +5deg to +40deg C
LINAK Battery Charger - CH01
Mains 100-240 VAC/50-60 Hz switch
Mode power supply
Charging voltage 27.6 VDC +- 2%
Charging current Max 500mA
Green LED for power on
Yellow LED for charging function
Yellow LED turns into green when
batteries are fully charged.
LINAK products may be stored in non-
heated storage facilities with humidity
between 0 and 100%, none condensing.
None condensing means that one
should not take a product from an ice
cold warehouse into a room with a
temperature of 20deg C; if this is done
then moistness will appear on
the products.
Leckey Mygo+ User Manual p53

Advertisement

Table of Contents
loading

Table of Contents