Leckey Mygo+ User Manual page 10

p10 Leckey Mygo+ User Manual
SECTION 7.2:
ATTACHING THE FOOTREST (IF ORDERED)
If using the Leckey footrests, remove the
seat from the chassis and set the seating
system upside down on a work surface.
Open up the angle of the leg supports
by releasing the two locking levers
shown, and set to the maximum width.
Open the socket caps
the calf supports
position, with the footplates facing
forward and retighten the socket cap bolts
with the multi-tool.
Always make sure the foot
plate is attached firmly.
and slide in
C
. Set to the desired
D
A
A
,
B
B
C
D
B
C