Leckey Mygo+ User Manual page 45

SECTION 9.27:
TRANSFERRING YOUR CHILD
INTO AND OUT OF THE SEAT
Before transferring the child into the seat
carry out the daily product inspection as
outlined in Section 12 of this user manual.
Adjust the seat to a comfortable height
to facilitate transfer. Lock all the castors,
ensuring that they are facing outwards
to maximise product stability. Make sure
the safety buckle on the chest harness
is released and is out of the way to
facilitate transfer.
If the seat has flip-away thoracic laterals,
first move these out of the way
using knob
A
.
Unclip the pelvic harness or Pelvic Cradle
in the middle, undo the side velcro of the
Pelvic Cradle and allow the harness to
open out to facilitate transfer. Lastly,
if sandals are fitted, open the straps.
You are now ready to transfer or hoist
the child into the seat.
When transferring it is advised to
put chair into tilt so child's pelvis is
encouraged to rest at the back of the
seat base.
The pelvic harness and Pelvic Cradle are
fastened using the middle buckle, and side
velcro (in the case of the Pelvic Cradle).
Always secure the pelvic
harness or Pelvic Cradle first
before fastening other buckles
or harnesses. Adjust the
harness so the child cannot
slide or creep forward in
the seat.
Leckey Mygo+ User Manual p45
A