Honda Goldwing GL1200L 1985 Manual page 94

Electronic Control Unit (E(~U)--""""'--""""'------""""''''''''''-
Remove the seat and the sa<jdh9bElg lids, Remove the
license
Remove the bolt and 2 ECU bracket nuts, then remove
the ECU from the travel trunk bracket
vctft:tliLJIIY
slide the ECU out of its case, Press out
ECU and disconnect the from the
ECU.
NOTES:
• not pry the open or bend the terminals,
• and dirt away from the terminals.
attlAmiol
to disassemble the ECU,
Slide the ECU into its case, and install the dust cover.
CAUTION: If the dust cover is not installed, the ECU
may be by water or dust.
and install the
ltin and
Attach the ECU
r.ollnl"'"
to the ECU
until the lock I'!nln~('A!':
Position the ECU under the travel
bolt and nuts.
10·33