Panasonic Lumix S1H Series Operating Instructions Manual page 75

Operation modes that can be used will differ depending on the used lenses and on
0
[Body(B.I.S.) / Lens(O.I.S.)] settings.
When using lenses with an O.I.S. switch, the camera's operation mode cannot be
0
set to [OFF]. Set the switch on the lens to [OFF].
When the following functions are being used, [Operation Mode] switches to [
0
([Normal]):
– [ ] mode
– Video recording/[6K/4K PHOTO]/[Post-Focus]
[Boost I.S. (Video)]
Increase the effectiveness of the image stabiliser during video recording.
This effect can help provide a stable composition when you want to
perform recording from a fixed perspective.
Settings: [ON]/[OFF]
When [Boost I.S. (Video)] is operating, [
0
To change composition while recording, first set this to [OFF] before moving the
0
camera.
To set this to [OFF] during recording, use the Fn button. (l 153)
0 Longer focal lengths will result in weaker stabilisation.
[Anamorphic (Video)]
You can switch to an image stabiliser that suits anamorphic recording.
Settings: [ ]([2.0k])/[
[ ]([1.30k])/[OFF]
Make settings to suit the magnification of the anamorphic lens you are using.
0
While [Anamorphic (Video)] is functioning, the set magnification appears on the
0
image stabiliser icons on the recording screen, as shown by [
When [Boost I.S. (Video)] is set, [Boost I.S. (Video)] is prioritised.
0
[Lens Information]
Register the information for lenses that cannot communicate with the camera.
Match the in-body image stabiliser with the information of the lens you register.
The settings on this camera enable you to switch settings to suit full-frame
or Super 35 mm/APS-C lenses. (l 16)
] is displayed on the recording screen.
]([1.8k])/[ ]([1.5k])/[
6. Image Stabiliser
]([1.33k])/
] and [
DVQX1961 (ENG)
]
].
75