Panasonic Lumix S1H Series Operating Instructions Manual page 193

When connected to Wi-Fi, the battery drains quickly.
0
Turn the camera off frequently such as by using [Power Save Mode] (l 34).
Recording stops before finishing.
Cannot record.
Cannot use some functions.
In high ambient temperatures or if the camera is used for continuous recording, the
0
temperature of the camera will rise.
To protect the camera against a rise in temperature, after [
recording will be stopped, and the following functions will not be available for a time.
Wait until the camera cools down.
– [6K/4K PHOTO]
– [Post-Focus]
The subject is not focused properly.
Confirm the following details:
0
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]?
– Is [Focus/Shutter Priority] set to [RELEASE]?
– Is AF Lock set where it is not appropriate?
The recorded image is blurred.
The image stabiliser is not effective.
The shutter speed will become slower and the image stabiliser function may not
0
work properly when recording in dark places.
In these cases, use a tripod and the self-timer when recording.
The subject appears distorted on the image.
0 When a moving subject is recorded while using the following functions, the subject
may appear distorted in the picture:
– [ELEC.]
– Video recording
This is a characteristic of the CMOS sensor that is the image sensor of the camera,
and is not a malfunction.
] is displayed,
– Video recording
– [AF-Point Scope]
– [6K/4K PHOTO]
DVQX1961 (ENG)
18. Materials
193