Panasonic Lumix S1H Series Operating Instructions Manual page 126

11. Special Video Recording
6
Start Focus Transition.
≥Press
21
and then press
A Current focus position
B Registered focus position
0 When [Focus Transition Wait] is set,
Focus Transition starts after the set time
has elapsed.
7
End Focus Transition.
≥Press [Q].
8
Stop recording.
≥Press the video rec. button once again.
0 Maintain the same distance to the subject after setting the focus position.
The moving speed of focus varies depending on the lens being used.
0
While using [Focus Transition], it is not possible to focus on anything other
0
than the registered focus position.
Any of the operations below will clear the focus position settings.
0
– Operating the camera on/off switch
– Zoom operation
– Switching the focus mode
– Switching the recording mode
– Replacing the lens
When the following functions are being used, [Focus Transition] is not
0
available:
– [Variable Frame Rate]
– [Live Cropping]
[Focus Transition] cannot be used when using an interchangeable lens that
0
does not support the focus mode [AFC].
126
DVQX1961 (ENG)
to select [1], [2], or [3],
or .
10 5
(m)
∞
1
1
3 2 1.5 1 0.5 0.1
 
2 3