17. Connecting to Other Devices
Copying Images to PCs Using "PHOTOfunSTUDIO"
Getting started:
Turn on the camera and PC.
0
Install "PHOTOfunSTUDIO" on PC. (l 180)
0
1
Connect the camera and PC with the USB connection cable (C–C or
A–C). (l 176)
2
Press 34 to select [PC(Storage)] and then press
A message about charging may be displayed. Wait for a while until the
0
message disappears.
3
Copy images to the PC using "PHOTOfunSTUDIO".
Do not delete or move the copied files and folders in, for example, Windows
0
Explorer.
Playback and editing using "PHOTOfunSTUDIO" will become no longer
possible.
Take care not to turn off the camera while images are being imported.
0
After importing of the images is completed, perform the operation to safely
0
remove the USB connection cable on the PC.
Turn off the camera and disconnect the USB connection cable before
0
removing the card from the camera. Otherwise, the recorded data may be
damaged.
Installing Software
Install the software to perform operations such as organising and
correcting recorded images, processing RAW images, and editing videos.
To download the software, your PC needs to be able to connect to the internet.
0
Downloading may take a while depending on the communication environment.
0
0
Supported OSs are current as of August 2019 and are subject to change.
180
DVQX1961 (ENG)
or
.