Panasonic Lumix S1H Series Operating Instructions Manual page 29

Inserting a Battery into the Camera for Charging
Charging time
Using the camera body and the supplied AC adaptor.
0
The camera is turned off.
The indicated charging time is for when the battery has been discharged completely.
0
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not
been used for a long time may be longer than normal.
Use the products supplied with the camera for charging.
0
1
Set the camera on/off switch to [OFF].
2
Insert the battery into the camera.
3
Connect the camera USB port and the AC adaptor using
the USB connection cable (C–C).
0 Hold the plugs and insert them straight in or pull them straight out.
(Inserting these at an angle may cause deformation or malfunction)
4
Connect the AC cable to the AC
adaptor and then insert into the
electrical outlet.
≥[CHARGE] is displayed on the status
LCD and charging starts.
[FULL] is displayed when charging is
complete.
Approx. 140 min
DVQX1961 (ENG)
2. Getting Started


29