Panasonic Lumix S1H Series Operating Instructions Manual page 172

16. Wi-Fi/Bluetooth
End Bluetooth Connection
[ ]
Even if you terminate the connection, the pairing information for it will not be
0
deleted.
Connecting to a Paired Smartphone
Connect paired smartphones using the following procedure.
1 Enable the Bluetooth function of the camera.
[
0
2
On the smartphone, start up "LUMIX
Sync".
If a message is displayed indicating that the
0
smartphone is searching for cameras,
close the message.
3
Select [
4
Select [Bluetooth Setup].
5
Turn Bluetooth ON.
6
From [Camera registered] items, select
the camera's device name.
Even if you set up pairing with more than one smartphone, you can only
0
connect to one smartphone at a time.
0 When pairing takes some time, cancelling the pairing settings on both the
smartphone and camera and re-establishing the connection may result in the
camera being detected correctly.
Terminating the Wi-Fi Connection
1
Press the shutter button halfway to set the camera to recording mode.
2 Terminate the Wi-Fi connection.
[
0
3
On the smartphone, close the "LUMIX Sync".
172
DVQX1961 (ENG)
[ ] [Bluetooth]
] [ ] [Bluetooth]
].
] [ ] [Wi-Fi]
[Bluetooth] Select [OFF]
[Bluetooth]
Bluetooth
XXXXXXXX
[Wi-Fi Function]
[ON]
LUMIX Sync
[Yes]