How to Use the Washing Machine
1
Sort the laundry
n Sort the laundry according to the type of fabric, care label symbol, and degree of soiling.
Page 8: Preparation of the laundry
n Do not exceed the maximum load.
n Laundry shall not exceed this line.
Otherwise, laundry may jump out from the washing tub while spinning
and it may cause damage.
2
Press the Power button to turn on the power
n If no program is selected within 10 minutes, the washing machine
automatically switches itself off .
Press the Power button again to turn on the power.
3
Select and adjust the program
n Select a program with the Program button.
Page 17: List of Programs
n You can change the combination or settings of wash, rinse, and spin operations by the Wash,
Rinse, and Spin buttons.
n You can switch on the "Auto Self Clean" function by the Auto Self Clean button.
Page 11: How to use the "Auto Self Clean" function
Once switched on, the "Auto Self Clean" function operates every time you do your laundry.
To deactivate, press the same button again while the power is on.
n You can select the water temperature with the Water Temp button.
Page 14: How to use the Water Temp function
Set the operations
Select a function.
4
Press the Start/Pause button
n Before operation starts, the laundry is weighed. Then, the
necessary amount of detergent and water shall be displayed.
Change the combination or settings
of Wash, Rinse, and Spin.
Max
SF-P130TCV
ff
Select a program.
9