Dnd; Local Conference; Creating A Local Conference - Huawei eSpace 7910 User Manual

eSpace 7910 IP Phone
User Guide
Step 4 Select BLF and press Enable, and set other parameters as prompted. For details about the
parameter description, see
Step 5 Press Done.
----End
For details about the LED status, see

5.20 DND

After the DND function is enabled, all incoming calls are rejected automatically but you can
still make calls.
l
l

5.21 Local Conference

5.21.1 Creating a Local Conference

Creating a Conference Using Join
Step 1 When users A and B are talking, user A presses Conf to hold the current call, and hears the dial
tone.
Step 2 User A enters the number of user C, presses Contact to select a contact in my contacts, or presses
History to select a contact in call records.
Step 3 User A presses Call.
Step 4 When user C answers the call, user A can talk with user C. User A presses Join to create a local
conference.
----End
Issue 04 (2014-01-18)
Enabling DND: On the home screen, press DND to enable the DND function.
DND enabled is displayed on the home screen, and
Disabling DND: In DND state, press DND to disable the DND function.
NOTE
The DND function is available only for the registered line. For a new line, the DND function must be
enabled again.
NOTE
Before using the local conference function, ensure that at least two lines have been configured for the
account.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 3-1.
2.1.2 LED.
5 Phone Usage
is displayed in the status bar.
53